Methods for troubleshooting dehumidifiers

Release time:

2023-04-19 09:23

The general troubleshooting of dehumidifiers can refer to the following sequence:

（1） Maintenance sequence for non dehumidification faults of dehumidifiers:

1. Dehumidifier ventilation system malfunction:

<1> Air inlet and outlet grilles: A. Artificial damage or aging and cracking; B. Severe obstruction of air inlet or outlet;

<2> Air filter screen: blocked or damaged by dust;

<3> Evaporator: A. Dust accumulation on the fins of the evaporator condenser; B. Ice on the surface of the evaporator;

<4> Fan motor: A. Capacitor damaged; B. Fan motor clamp shaft; C. Loose rotor and shaft; D. Shaft bending deformation; E. Bearing damage (oil bearing, lubricating oil volatilization; ball bearing, ball wear); F. The winding is burnt out;

<5> Blade: A. Loose fixing screws; B. Fan blades deformed or damaged; C. Severe dust accumulation on the wind blades seriously affects the air output; D. There is also a phenomenon of the small dehumidifier fan blades getting stuck due to severe dust accumulation.

2. Electrical system malfunction:

<1> The compressor and fan do not rotate: A. The power supply is cut off; B. The switch is not closed; C. Socket disconnection; D. Low voltage; E. The circuit breaker is disconnected; F. The safety tube is burnt out; J. Three minute compressor protection.

<2> Compressor not running, fan running: A. Relay failure; B. Capacitor failure; C. Overload protection.

<3> Compressor and fan both running: refrigeration system malfunction.

3. Refrigeration system malfunction:

<1> Full refrigerant leakage;

<2> Cooling system blockage: A. Dirty blockage; B. Oil blockage; C. Welding plug;

<3> Excessive refrigerant;

<4> The compressor has no displacement (malfunction).

4. Compressor failure:

<1> Poor compression, high and low pressure chamber blowby< 2> Damaged running parts, compressor holding shaft.

（2） Maintenance sequence for increased noise in dehumidifiers:

1. The ground is uneven and the dehumidifier is placed unevenly;

2. Loose parts on the dehumidifier;

3. There are foreign objects inside the dehumidifier;

4. The fan blades are damaged or deformed, causing the dynamic balance to be disrupted;

5. Starter failure;

6. There is a collision between pipelines (copper pipes);

7. The fan is out of oil;

8. Fan bearing failure (oil bearing, lubricating oil volatilization; ball bearing, ball wear);

9. Excessive compressor noise;

10. Excessive refrigerant or lubricating oil filling can cause liquid hammer.

（3） The maintenance sequence of the dehumidifier flowing water to the ground fault:

1. The placement of the dehumidifier is unbalanced, and the sink is excessively tilted, resulting in water overflow;

2. The drainage hole or pipe of the water tank is blocked;

3. The sink is damaged and leaking;

4. Leakage or aging or rupture of the outlet pipe connection.

Troubleshooting methods for dehumidifiers

The Influence of Moist Air on Metallized Film and Its Solutions

news

What are the differences between household dehumidifiers and industrial dehumidifiers

What are the differences between household dehumidifiers and industrial dehumidifiers? Actually, it can be understood from the literal meaning, mainly distinguishing based on the different environment/space used:

2023-05-16

How to choose a dehumidifier?

Due to the fact that dehumidifiers are relatively niche household appliances in China, and the main usage factors in the current market are still biased towards industrial and commercial use, some customers who have not yet contacted or used dehumidifiers may ask, what should they choose when choosing a household dehumidifier;

2023-04-19

What are the differences between household dehumidifiers and industrial dehumidifiers

2023-04-19

Phone: 400-9660-822

Fax: +86-0571-86730811

After sales phone number:+86 571 86730822

official account